Dry Lubrication for the Semiconductor Industry

Dicronite® provides friction reduction for mechanical systems within vacuum environments so you can avoid failure, increase efficiency, and maximize performance.

When to use Dicronite®

Engineers use Dicronite® when:

  • precision tolerances or sealing must be maintained

  • high or low temperatures limit the use of other lubricants

  • lubrication is needed where there’s exposure to chemicals, radiation, or other harsh environments

  • optimal performance is needed

  • power output of an assembly is being robbed by friction losses

  • friction is creating too much resistance in the motion of an assembly 

  • sliding wear is limiting component lifetime

  • there is galling and seizing of threaded components

  • a lubrication suitable for vacuum environments is necessary

Where to use Dicronite®

Common  applications that use Dicronite® include but are not limited to:

  • actuators

  • bearings

  • bushings

  • discs

  • electrical connectors  

  • fasteners

  • gears

  • pins

  • plates

  • rods

  • shafts

  • threads

  • valves

  • washers 

Why use

Benefits of using Dicronite® dry lubrication include: 

  • avoid component failure, increase reliability

  • extend component lifetime and decrease the need for maintenance 

  • increase mechanical efficiency for more power output  

  • ability to outperform in varied atmospheric conditions (humidity, vacuum, etc.)

  • 0.5 micron thickness won’t interfere with tolerances  

  • lubricant in extreme temperatures (-188° C to +538° C) 

  • compatible with many solvents, fuels, and fluids

  • compatible with greases and oils 

Dicronite®’s ability to lubricate within precision tolerances, superior performance under vacuum conditions and strong adherence are key to meeting the stringent performance requirements of the semiconductor equipment industry.

Submit a Question

Technical Data Sheet


Most frequent questions and answers

Wear is a system effect, so it can be difficult to estimate the lifetime in each application. Dicronite® should be used for applications where sliding wear is present, but not abrasive wear – this is too aggressive for the soft, lubricious Dicronite® coating. In applications where an extensive wear life is required, it is common for Dicronite® to be applied on top of a hard, wear resistant coating.

We recommend testing to ensure Dicronite® is sufficient for your application and are always happy to coat a small order of parts to support your testing!

Dicronite® can be applied to all metals, most plastics, and some ceramics. In addition, Dicronite® can be applied on top of many other coatings or platings such as Nickel, Zinc, Chrome, Anodize, DLC, and more.

Dicronite® provides only minor corrosion prevention. It is not recommended to use Dicronite® to prevent corrosion. However, many customers use Dicronite® on top of coatings or platings that do prevent corrosion for combined corrosion resistance and friction reduction.

We recommend cleaning coated surfaces with isopropyl alcohol or mineral spirits, but other solvent or solutions may also be used. Avoid using cleaners that are very acidic or basic.


If wiping coated surfaces, use a soft cloth. Note that when wiping a coated surface, you may find a residue coming from the part – this is normal. It is not necessary to wipe the coated surface until no residue is wiped from the surface. The coating naturally “smudges” or “smears” as part of its ability to lubricate.

Coated parts should be handled to prevent physical damage to coated surfaces such as scratching, scraping, or abrasion. In addition, parts should be stored in a manner that prevents corrosion of the underlying substrate. If the part begins corroding underneath the Dicronite® coating this can diminish the performance of the coating.

Yes. Our standard process works the same for parts being re-coated.


Have additional questions about whether or not Dicronite will be a good fit for your application? 


Interested in receiving a trial coating on a few parts? Tell us about your application. 


Ready to prevent failure and improve performance? Submit an RFQ today. 

Scroll to Top
two surfaces sliding blue icon

Sliding Wear

Sliding wear occurs when two surfaces slide against one another causing material loss to one or both surfaces. Over time, this can result in component failures, additional maintenance, and costly down time.  

Coating components with Dicronite® can help minimize this wear and reduce the need for maintenance and down time.


Ready to improve performance? Tell us about your application today.  

precision tooling equipment icon

Tight Tolerance Lubrication

Extremely tight tolerances can present challenges when lubricants or coatings are needed to reduce friction. Many products are available to help reduce friction, but in the case of very tight tolerances, few can be integrated without the need for adjustments.

Dicronite® has an average thickness of 0.5 microns (0.00002 inch) or less. This precision thin film allows users to incorporate Dicronite® on designs with tight tolerances without the need for design or manufacturing changes.


Ready to improve performance? Tell us about your application today.  

vacuum environments blue icon

Vacuum Environment Lubrication

Vacuum environments present a challenge for lubrication. Many conventional lubricants aren’t effective under vacuum and are largely vaporized.

Dicronite® can be used in vacuum to reduce friction where other lubricants can’t function. The outgassing of Dicronite® under vacuum conditions is well below screening levels for spacecraft materials per ASTM E595.


Ready to improve performance? Tell us about your application today.  

lightening bolt power output icon

Energy Lost to Friction

Friction is wasted energy! Systems with critical mechanical power output need to be extremely efficient.

Dicronite® optimizes mechanical efficiency by reducing friction losses and can even work in tandem with existing lubrication to further optimize efficiency.

Dicronite® is especially useful in precision systems, extreme environments, or where minimizing size and weight is vital.


Ready to improve performance? Tell us about your application today.  

multiple blue gears icon


Fretting is a unique form of sliding wear that occurs when contact surfaces oscillate over a very small range of motion. Although it may seem minor, this surface wear can ultimately lead to fatigue cracking and devastating damage.

Dicronite® helps remedy fretting by providing lubrication at contact surfaces. This effectively reduces the wear and surface stresses that cause so much damage.

Dicronite® can be integrated into existing designs and assemblies without any other adjustments for seamless reduction of fretting wear.


Ready to improve performance? Tell us about your application today.  

sun and snowflake blue icon

Extreme Temperature Lubrication

Extreme low or high temperatures can be challenging environments for lubrication. At low temperatures, conventional lubricants may be too viscous to be effective, while extreme high temperatures can result in breakdown of the lubricant.

Dicronite can be used in extreme environments to ensure effective lubrication while also being used in combination with oils and greases.

Dicronite is stable across a wide temperature range:


Ready to improve performance? Tell us about your application today.  

blue flame icon

Excessive Heat from Friction

As friction in an assembly generates heat, elevated temperatures can result in unwanted operating conditions.

This can cause overheating and accelerate the breakdown of materials, resulting in costly maintenance and down time or destructive failure.

Proper lubrication can help minimize friction, reduce heat, and increase mechanical efficiency. Coat parts with Dicronite® to avoid excessive maintenance and ensure components will run as efficiently as possible.


Ready to improve performance? Tell us about your application today.