TUNGSTEN DISULFIDE (WS2) | COATING SERVICE
Dicronite® is a tungsten disulfide (WS2), dry film lubricant coating. This extremely thin film coating provides friction and sliding wear reduction in various applications across numerous industries.
Dicronite® is suitable for demanding environments such as extreme temperatures, vacuum, precision tolerances, and many more.
Coat components with Dicronite® to prevent failure, increase efficiency and improve performance.
COMMON APPLICATIONS
For 60+ years, Dicronite has been trusted to effectively lubricate:
- Actuators
- Ball Screws
- Bearings
- Bushings
- Chains
- Cylinders
- Couplings
- Discs
- Electrical Connectors
- Fasteners
- Gears
- Guides
- Nuts
- Plastic Molding Cavities
- Pins
- Plates
- Rails
- Rings
- Rivets
- Rods
- Shafts
- Slides
- Splines
- Sprockets
- Threads
- Valves
- Washers
- + More!
Have a quick question about your application?
Technical Information
APPLICATION PROCESS
Dicronite® is applied at one of many licensed coating facilities. After surface preparation, Dicronite® dry lubricant is impinged onto the substrate surface at high velocity (similar to sandblasting).
The coating process is conducted at ambient conditions. The material includes no binders or adhesives and requires no curing. Dicronite® can be re-applied to the same component repeatedly.
SUBSTRATES
All metals, most plastics, and some ceramics; may be applied on other coatings/platings
APPEARANCE
Silver, blue gray, dark gray
THICKNESS
0.5 micron (0.00002 inch) or less
PERFORMANCE OVERVIEW
FRICTION REDUCTION
Systems with Dicronite® coated on smooth surfaces often range between 0.03 and
0.07 dynamic coefficient of friction, and 0.05 to 0.09 static coefficient of friction
WEAR REDUCTION
Suitable for sliding wear reduction; not intended for reducing abrasive wear
LOAD CAPACITY
Same as substrate, up to approximately 350,000 psi (2,415 MPa)
THERMAL STABILITY
Functions across high and low temperatures; withstands temperature changes
• up to approximately 538°C (1000°F) in air
• up to approximately 1316°C (2400°F) in vacuum
• down to cryogenic temperatures
VACUUM STABILITY
Very low outgassing; suitable spacecraft material per ASTM E595 guidelines
• TML < 1.0 %, CVCM < 0.1 %
COATING PROPERTIES
CHEMICAL STABILITY
Inert
TOXICITY
Non-toxic
MAGNETISM
Non-magnetic; won’t impact substrate magnetism
CONDUCTIVITY
Will not significantly affect substrate conductivity (thermal or electrical)
CORROSION RESISTANCE
Provides only minimal corrosion inhibition
COMPATIBILITY
LUBRICANTS
Compatible with oils and greases
LIQUIDS
Compatible with fuels, hydraulic fluids, and many solvents
OXYGEN
Suitable for liquid and gaseous oxygen systems
RADIATION
Radiation stable; tested according to LEO and nuclear containment vessel radiation levels
BIOCOMPATIBILITY
Biocompatible per USP Class VI and select ISO-10993 testing
Companies that Trust the Dicronite® Coating Process:
READY TO TALK TO AN EXPERT?
Join countless engineers who choose Dicronite® to improve component perfromance. Speak with an expert today.